Tabletop Vortex Fountain Quick-Start Guide
Here are some quick instructions to get your Quox Creek Tabletop Vortex Fountain up and running in minutes. For more detailed instructions, see the Owner’s Manual.
- 1. Unpack and unwrap all the parts; rinse everything to remove dust or debris.
- 2. Screw the leveling feet into the holes in the bottom of the fountain.
- 3. Adjust the feet to make the fountain level. Check with the mini-level tool.
- 4. Adjust the pump’s regulator to full-open by turning it toward the plus (+) sign.
- 5. Attach the tubing to the pump by pushing it onto the nozzle. It’ll be snug.
- 6. Hold the nozzle inside the cylinder while gently pushing the tubing onto the nozzle on the bottom.
- 7. Put the pump in the reservoir and drape the cord over the side, in the notch.
- 8. Seat the cylinder onto the base with the pump’s cord threaded through the notch. Re-check the level at the top of the vortex chamber.
- 9. Add distilled water through the drain grid; DO NOT pour water into the cylinder itself. Fill until water reaches the bottom of the cylinder.
- 10. Lower the tray around the cylinder and onto the top of the base.
- 11. Create a drip-loop as you plug in the fountain.
- Enjoy!
WARNING: DO NOT ADD WATER WHILE THE FOUNTAIN IS OPERATING.
This Quick-Start guide is not a replacement for the Owner’s Manual.
Owners are responsible for understanding and following the information and instructions in the Owner’s Manual.